2024?N

Andrea Bimbi, M. Kawabata, T. Tsunekawa and H. Sasahara,
Rotary TIG WAAM Particle Simulation,
Proceedings of The 20th International Conference on Precision Engineering (ICPE2024), (2024.10.23-26) Sendai, GS07-14

T. Minowa, M. Usui and H. Sasahara,
Effect of disturbance and tool condition on cutting temperature measurement by utilizing tool-work thermocouple method,
Proceedings of The 20th International Conference on Precision Engineering (ICPE2024), (2024.10.23-26) Sendai, OS05-33

M. Kawabata, T. Sasaki, K. Wada, S. Kanemaru, Y. Nomura and H. Sasahara,
Development of deposition height control system for GTAW-based additive manufacturing,
Proceedings of The 20th International Conference on Precision Engineering (ICPE2024), (2024.10.23-26) Sendai, OS09-26

M.Kawabata, H.Sasahara,
Numerical and experimental investigation of deposition accuracy in GTAW-based additive manufacturing,
Proceedings of the 24th international conference of the european society for precision engineering and nanotechnology, (2024.6.10-14) Dublin, Ireland, P5.03.

2023?N

Ilia Radchenko, W. Takahashi, H. Takahashi, H. Sasahara,
Internal coolant circulation-based cooling schemes to reduce the cutting edge temperature and heat spreading when turning SUS304 stainless steel, Proc.
The International Conference on Leading Edge Manufacturing/Materials&Processing 2023, (2023.6.12-16) Rutgers University, New Brunswick, NJ, USA, LEMP2023-003

IY.Kamada, H.Sasahara,
Analytical prediction of regenerative chatter vibration orthogonal to cutting feed direction in low frequency vibration cutting, Proc.
The International Conference on Leading Edge Manufacturing/Materials&Processing 2023, (2023.6.12-16) Rutgers University, New Brunswick, NJ, USA, LEMP2023-027

IM. Kawabata, T. Sasaki, K. Wada, S. Kanemaru, Y. Nomura, H.Sasahara,
Deposition stability against arc length variation of a rotary TIG torch for WAAM, Proc.
The International Conference on Leading Edge Manufacturing/Materials&Processing 2023, (2023.6.12-16) Rutgers University, New Brunswick, NJ, USA, LEMP2023-039

IS.Kurashige, M.Nomura, Y.Ito, Y.Fukuhara, H.Sasahara,
Curve machining of CFRP using disk-shaped diamond electroplated wire mesh grinding wheel,
The 25th International Symposium on Advances in Abrasive Technology, 10 - 13 Dec. 2023, Taiwan

2022?N

K.C.Wickramasinghe, H.Sasahara,
Ultra-Fine Bubbles (UFB) Inserted Novel Coconut oil based Metalworking Fluid (MWF) as a Sustainable Lubricant for Turning of Ti-6Al-4V,
Proceedings of the ASME 2022 17th International, Manufacturing Science and Engineering Conference (MSEC202), West Lafayette, Indiana, USA (2022.6.27-2022.7.1) [MSEC2022-85026]

K.Okita, D.Yamamoto, T.Otsuki, T.Koga, H.Sasahara,
Relation Between Frequency Analysis Results of Profile Curves of Machined Surface by Ball End Mill and Sensory Scale Measured by Thurstone Method,
Proc International Symposium on Flexible Automation 2022, July 2022, Yokohama(2022.7.3-7) [ISFA2022-006]

Junjie He, H.Sasahara,
Experimental Investigation about The Microstructure of Joint Area between Layers on Thin Wall Part via Laser Metal-Wire Deposition,
Proc International Symposium on Flexible Automation 2022, July 2022, Yokohama(2022.7.3-7) [ISFA2022-060]

K.C.Wickramasinghe, H.Sasahara,
Smart machining approach for turning Ti-6Al-4V through Ultra fine bubble injected sustainable lubricant,
Proc. 19th International Conference on Precision Engineering, November 2022, Nara (2022.11.28-12.2) C038

Y.Ochi, M. Usui, H.Sasahara,
REdustion of Drilling Force on Reverse Finishing of Aluminum Alloys,
Proc. 19th International Conference on Precision Engineering, November 2022, Nara (2022.11.28-12.2) C067

H.Nagamatsu, K.Nakajima, M.Usui, T.Abe, H.Sasahara,
Improvement of joint strength of wire and arc additive manufactured titanium and aluminum dissimilar alloys,
Proc. 19th International Conference on Precision Engineering, November 2022, Nara (2022.11.28-12.2) C235

K.Okada, T.Otsuki, H.Sasahara,
High-speed, high-accuracy and low-vibration machining of polygonal shapes by NC parameter adjustment based on design of experiments,
Proc. 19th International Conference on Precision Engineering, November 2022, Nara (2022.11.28-12.2) C200

M.Kawabata, T.Sasaki, K.Wada, S.Kanemaru, Y.Nomura, H.Sasahara,
Effect of electrode rotation speed on material deposition stability in WAAM with a rotary TIG torch,
Proc. 19th International Conference on Precision Engineering, November 2022, Nara (2022.11.28-12.2) C211

Y.Kamada, H.Sasahara,
Suppression of regenerative chatter vibration orthogonal to cutting feed direction by Low Frequency Vibration-cutting,
Proc. 19th International Conference on Precision Engineering, November 2022, Nara (2022.11.28-12.2) C246

2021?N

H.Nagamatsu, H.Sasahara, T.Abe,
Microstructure and welding penetration of wire and arc additive manufactured Pure Titanium and A5356 dissimilar alloys using cold metal transfer welding,
euspen?fs 21st International Conference & Exhibition, Copenhagen, DK, June 2021, Online (2021.6.7-11) P71.

K.C.Wickramasinghe, H.Sasahara,
The influence of the Ultra Fine Bubble (UFB) inserted Coconut oil based metalworking fluid (MWF) on tool wear modes and mechanisms in turning of Inconel 718,
Proc. 10th LEM21, Kitakushu. November 2021, Online (2021.11.15-17) C01, pp.175-180.

Y.Ochi, M.Usui, H.Sasahara,
Introducing Compressive Residual Stress on Machined Surface of Aluminum Alloys A6061 and A7075 by Reverse Finishing,
Proc. 10th LEM21, Kitakushu. November 2021, Online (2021.11.15-17) C10, pp.208-213.

S.Kondo, T.Iwakawa, M.Kikuchi, Y.Ito and H.Sasahara,
Fundamental characteristics of rubber-bonded grinding wheel,
Proc. 10th LEM21, Kitakushu. November 2021, Online (2021.11.15-17) D02, pp.176-162.

Y.Ito, Y.Kita, Y.Fukuhara, M. Nomura, H.Sasahara,
In-process measurement of grinding surface temperature and surface pattern,
Proc. 10th LEM21, Kitakushu. November 2021, Online (2021.11.15-17) D05, pp.276-281.

Y.Kita, Y.Ito, H.Sasahara,
The effect of cold air supply from inside of thin-walled grinding wheel in CFRP end face finishing,
Proc. 10th LEM21, Kitakushu. November 2021, Online (2021.11.15-17) D06, pp.282-286.

T.Shimada, H. Nagamatsu, T.Abe, .Kaneko, H.Sasahara,
Mechanical properties and joining state in wire and arc additive manufacturing of Al-Si/Mg-Al-Zn dissimilar alloys,
Proc. 10th LEM21, Kitakushu. November 2021, Online (2021.11.15-17) F05, pp.435-439.

He Junjie, K.Noriyama, H.Sasahara,
Microstructure and residual stress distribution of Ti6Al4V alloy via laser metal wire deposition with double laser irradiation head,
Proc. 10th LEM21, Kitakushu. November 2021, Online (2021.11.15-17) F06, pp.440-443.

2020?N

K.C Wickramasinghe, H.Sasahara, U.Masatoshi,
Performance Evaluation of White Coconut Oil Based MetalWorking Fluid (MWF) under Minimum Quantity Lubrication (MQL) for Machining of Inconel 718 and AISI304,
Proceedings of the JSME 2020 Conference on Leading Edge Manufacturing/Materials and Processing LEMP2020, Cincinatti, OH, USA (2020.6. 22-26), LEMP2020-8535.

K.C Wickramasinghe, H.Sasahara,
Sustainable Metalworking Fluid (MWF) for high performance machining of difficult to cut materials,
ICP '20 International Workshop on Innovations in Cleaner Production. ISBN: 978-1-912532-18-6

Y.Kamada, H.Sasahara,
Residual stress characteristics on machined surface machined by Low Frequency Vibration-cutting,
Proc. ICPE2020, Online (2020.11.23-27) [B-1-9]

K.C.Wickramasinghe, H.Sasahara,
Empirical investigation and Modelling of Work Tool interface Temperature in machining of Inconel 718 under different cooling conditions,
Proc. ICPE2020, Online (2020.11.23-27) [B-1-12]

M.Makino, K.Utsumi, H. Sasahara,
Chatter Vibration and Machined Surface Properties in Turn-milling,
Proc. ICPE2020, Online (2020.11.23-27) [B-1-21]

Y.Kita, Y.Ito, H.Sasahara,
Grinding CFRP with Cold Air Supply from inside of Thin Walled Electrodeposited Grinding Wheel,
Proc. ICPE2020, Online (2020.11.23-27) [B-2-5]

M.Kawabata, M.Nomura, Y.Ito, H.Sasahara,
Effect of a coolant supply assist sheet included in a woven metal wire tool with electrodeposited diamond grains on CFRP core drilling,
Proc. ICPE2020, Online (2020.11.23-27) [B-2-7]

H.Masuda, H.Sasahara,
Molding on Curved Surface in WAAM by Shape Monitoring and Feedback,
Proc. ICPE2020, Online (2020.11.23-27) [B-5-16]

R.Imoto, T.Tsurumaki, Y.Yamamoto, K.Noriyama, H.Sasahara,
Optimization of the Fabricating Conditions on Laser Metal-wire Deposition using Ti-6Al-4V,
Proc. ICPE2020, Online (2020.11.23-27) [B-5-15]

M.Kawabata, M.Nomura, Y.Nomura, H.Sasahara,
Effect of a coolant supply assist sheet included in a woven metal wire tool with electrodeposited diamond grains on CFRP core drilling,
Proc. ICPE2020, Online (2020.11.23-27) [B-2-7]

R.Kobayashi1, N.Fujita1, H.Nagamatsu, H.Sasahara,
Fabrication of Ni/Co based functionally graded materials with WAAM,
Proc. ICPE2020, Online (2020.11.23-27) [B-5-17]

H.Nagamatsu, A.Pagliai, H.Sasahara,
Influence of processing conditions on porosity in WAAM-block structures with aluminum alloy,
Proc. ICPE2020, Online (2020.11.23-27) [B-5-20]

2019?N

K.C Wickramasinghe, G.I.P. Perera, Himan KG Punchihewa and H.Sasahara,
Surface Quality Evaluation of 0.2% C and AISI 304 Steels in Turning with Sustainable lubricating Condition,
Proc. 8th International Conference on Manufacturing, Machine Design and Tribology (ICMDT2019) (2019.4. 24-27), Kagoshima, Japan, FR-A-2-2?D

M.Kawabata, R.Koyasu and H.Sasahara,
Application of Rough Grinding Wheel and Slant Feed Grinding to High Efficiency Machining of CFRP with Coolant Supplying from Inside of Grinding Wheel,
Proc. 8th International Conference on Manufacturing, Machine Design and Tribology (ICMDT2019) (2019.4. 24-27), Kagoshima, Japan, FR-A-2-5.

Y.Takada and H.Sasahara,
Improvement of the surface roughness on the friction stir burnishing,
Proc. 19th Int. Conf. EUSPEN, Bilbao, Spain (2019.6), pp.94-97.

T.Abe, J.Kaneko, H.Sasahara,
Deposited metal shape control based on n umerical simulation for wire arc additive manufacturing,
Proc. 8th Int. Conf. ASPEN, Matsue, (2019.11) A33 USB.

N.Fujita, K.Takada1 and H.Sasahara,
Metal Additive Manufacturing of Aluminum Alloy by Friction Surfacing,
Proc. 8th Int. Conf. ASPEN Matsue, (2019.11) A35 USB.

H.Nagamatsu and H.Sasahara,
Double-weld-overlay cladding to make an undiluted surface on drical-outer layer using stainless steel and Ni-based wire,
Proc. 8th Int. Conf. ASPEN Matsue, (2019.11) A36 USB.

K.C.Wickramasinghe, I.Perera, H.Punchihewa, H.Sasahara,
Investigation of the Chip Curl Radius of 0.2% C and AISI 304 Steel during Turning under Sustainable Lubricant,
Proc. 8th Int. Conf. ASPEN, Matsue, (2019.11) E09 USB.

M.Kawabata, R.Koyasu, H.Sasahara,
High-Efficiency Grinding of CFRP with Coolant Supplying from Inside of Grinding Wheel?C
Application of Rough Grinding Wheel, Proc. ISAAT 2019, Shenzhen, China (2019.12.6-9) USB A17.

Y.Kamada and H.Sasahara,
Simulation of Chatter Vibration in Low Frequency Vibration-cutting,
Proc. ISAAT 2019, Shenzhen, China (2019.12.6-9) USB C17.

2018?N

T.Abe, H.Sasahara,
Fabrication of Lattice Structures by Wire and Arc-based Additive Manufacturing,
Proc. 18th Int. Conf. EUSPEN, Venice, Italy (2018.6), pp.279-280.

K.Utsumi, S.Shichiri, S.Kayama, H.Sasahara,
Study on effect of lead and tilt angle of tool on cutting force and tool wear in turn milling,
Proc. 18th Int. Conf. EUSPEN, Venice, Italy (2018.6), pp.355-356.

K.Matsubara, T.Kimura, H. Sasahara,
Optimization of grinding conditions for small diameter hole to achieve higher performance of linear solenoid,
Proc. 18th Int. Conf. EUSPEN, Venice, Italy (2018.6), pp.279-280.

S.Shichiri, K.Utsumi, H.Sasahara,
Effect of tool posture for tool wear on turn-milling,
Proc. ISFA2018, Kanazawa, Japan (2018.7), USB#18.

T.Tsurumaki, S. Tsukamoto, H.Chibahara, H.Sasahara,
Precise fabrication and cutting of wall structure to repair the thin end of plate using interlayer temperature monitoring on wire and arc-based additive manufacturing,
Proc. ISFA2018, Kanazawa, Japan (2018.7), USB#22.

S.Toyokawa, N.Nakatsuka, A.Kusakabe, H.Sasahara,
Surface Characteristic on Curved Grinding of Titanium Alloy with Coolant Supplying from Inner Side of Grinding Wheel,
Proceedings of 2018 International Conference on Machining, Materials and Mechanical Technologies (IC3MT) (2018.9.19-22), Rex Hotel, Ho Chi Minh City, Vietnam, Paper ID 2329.

N.Nakatsuka, S.Toyokawa, A.Kusakabe, S.Nakatsukasa, H.Sasahara,
Effect of the Type of Grinding Wheel on the Surface Characteristic of Titanium Alloy with Internal Coolant Supply,
Proceedings of 2018 International Conference on Machining, Materials and Mechanical Technologies (IC3MT) (2018.9.19-22), Rex Hotel, Ho Chi Minh City, Vietnam, Paper ID 2504.

S.Kojima, W.Takahashi, H.Sasahara,
Influence of machining conditions in turning-burnishing process on the finished surface,
Proc. 17th International Conference on Precision Engineering 2018 (ICPE2018) (2018.11.12-16), Kamakura, Paper ID B-1-13.

Y.Nishio, M.Usui,, H.Sasahara,
Evaluation of the Machined Surface Characteristics on Reverse Finishing of 0.45%C Steel,
Proc. 17th International Conference on Precision Engineering 2018 (ICPE2018) (2018.11.12-16), Kamakura, Paper ID B-1-14.

S.Horiuchi, H.Sasahara,
Grinding characteristics of Ni-Co-Cr-Mo Alloy with the coolant supplying from inner side of grinding wheel,
Proc. 17th International Conference on Precision Engineering 2018 (ICPE2018) (2018.11.12-16), Kamakura, Paper ID B-2-1.

H.Nagamatsu, J.Kinoshita, H.Sasahara,
Dissimilar metal deposition for a high purity deposited surface using TIG - MIG hybrid welding,
Proc. 17th International Conference on Precision Engineering 2018 (ICPE2018) (2018.11.12-16), Kamakura, Paper ID B-5-1.

T.Tsurumaki, Y.Yamamoto, K.Noriyama,, H.Sasahara,
Optimization of the Additive Fabrication Conditions on Laser Metal-wire Deposition using Copper Alloy,
Proc. 17th International Conference on Precision Engineering 2018 (ICPE2018) (2018.11.12-16), Kamakura, Paper ID B-5-2.

2017?N

H.Sasahara, M.Goto, W.Takahashi, H. Yamamoto, T.Muraki,
Chip Adhesion and Tool Wear in Driven Rotary Cutting,
Proc. ASME 2017 12th Int. Manuf. Sci. and Eng. Conf. MSEC2017, June 4-8, 2017, Los Angeles, CA, USA (MSEC2017-2958)

T.Otsuki, H.Sasahara, R.Sato,
An Evaluation Method for the Speed and Accuracy, of CNC Machine Tool,
Proc. 9th Int. Conf. on LEM21, Hiroshima (2017.11.14-16) (USB #034)

T.Abe, H.Sasahara,
Development of the shell structure building simulator with two-dimensional bead model for wire and arc-based additive manufacturing,
Proc. 9th Int. Conf. on LEM21, Hiroshima (2017.11.14-16) (USB C19)

T.Tsurumaki, H.Chibahara, S.Tsukamoto, H.Sasahara,
Precise Fabrication of Wall Structure onto Thin Plate End with Interlayer Temperature Monitoring on Wire and Arc-based Additive Manufacturing,
Proc. 9th Int. Conf. on LEM21, Hiroshima (2017.11.14-16) (USB C20)

T.Yoshioka, H. Sasahara,
Minimization of Thermal Distortion on Wire and Arc-based Additive Manufacturing on the Shaft,
Proc. 9th Int. Conf. on LEM21, Hiroshima (2017.11.14-16) (USB C22)

T.Kimura, H.Sasahara, K.Matsubara, Z.Oda,
Study on High Efficiency of Impeller Machining with Taper Ball End Mill,
Advances in Abrasive Technology XX (Proc. ISAAT2017), Okinawa (2017.12.3-6) 846-851.

S.Toyokawa, N.Nakatsuka, A.Kusakabe, H.Sasahara,
Study on the residual stress on grinding of titanium alloy with coolant supplied from inner side of grinding wheel,
Advances in Abrasive Technology XX (Proc. ISAAT2017), Okinawa (2017.12.3-6) 972-977.

2016?N

Filippo Montevecchi, Niccol? Grossi, Hisataka Takagi, Antonio Scippa, Hiroyuki Sasahara, Gianni Campatelli,
Cutting forces analysis in additive manufactured AISI H13 alloy, Procedia CIRP, 7th HPC 2016 - CIRP Conference on High Performance Cutting,
Chemnitz, Germany (2016.5.31) pp.476-479. doi: 10.1016/j.procir.2016.04.034

K.Matsubara, J.Tsuchimura, H.Sasahara,
Performance of small diameter grinding wheel with coolant supplying from its inner side,
Proc. 16th Int. Conf. EUSPEN, Nottingham, UK (2016.6) p.4,17.

A. Miyake, H. Sasahara, A. Kitakaze, S. Katoh, M. Muramatsu, K. Noguchi, K. Sannomiya, T. Nakaya,
Effect of Low Frequency Vibration Applied to Feed Direction on Turning Process,
Proc. ISFA2016, Cleveland, Ohio, U.S.A. (2016.8.1-3). doi: 10.1109/ISFA.2016.7790188

K. Nomura, N. Takeuchi, Y. Ito, Y. Takeda and H. Sasahara,
Effect of axial vibration on peripheral finishing of CFRP using woven metal wire tool with electrodeposited diamond grains,
Proc. 19th ISAAT, Stockholm, Sweden, (2016/10.2-5) pp.113-117.

R. Koyasu, K. Suzuki1, Y. Ito, Y. Fukuhara, Y. Takeda, M. Matsubara, H. Sasahara, Y. Yao and K. Nomura,
A newly developed woven metal wire tool with electrodeposited diamond grains and its application for CFRP core drilling,
Proc. 19th ISAAT, Stockholm, Sweden, (2016/10.2-5) pp.118-123.

T. Nakamura, H. Sasahara, S. Kusunose and I. Nishizaki,
Identification of Aluminum Alloy Flow Stress to Determine FEM Analysis Constitutive Equation for Machining Material,
Presented at Proc. 19th ISAAT, Stockholm, Sweden, (2016/10.2-5) (published in Materials Science Forum ISSN:0255-5476, Vol.874, pp.457-462, doi:10.4028/www.scientific.net/MSF.874.457)

Y. Fukuhara, S. Suzuki and H. Sasahara,
Effect of grinding wheel specifications on the grinding wheel surface temperature and the surface roughness for coolant supplying system from inter side of grinding wheel,
Proc.2nd IC3MT, Matsue, (2016/10/7-11) USB#27

Y. Sukegawa, H. Sasahara and Y. Yamada,
Characteristics of machined surface and tool failure on CFRP cutting by circular saw,
Proc.2nd IC3MT, Matsue, (2016/10/7-11) USB#80

Y. Hiratsuka, H. Sasahara and Y. Takada,
Effect of Tip Shape of Burnishing Tool on processed surface of S45C on Frictional Stir Burnishing,
Proc.2nd IC3MT, Matsue, (2016/10/7-11) USB#81

R.Koyasu, K. Suzuki and H.Sasahara,
High Quality Machining of the CFRP with Hyper Grinding,
Proc.2nd IC3MT, Matsue, (2016/10/7-11) USB#84

S. Takizawa, Y. Nakano, S. Tsukamoto and H. Sasahara,
Mechanical Property of the Fabricated Object Using Nickel-based Alloy in Wire and Arc-based Additive Manufacturing,
Proc.ICPE2016, Hamamatsu, (2016/11/14-16), USB# B104-8222.

H. Nagamatsu, Y. Mitsutake, T. Hamamoto and H. Sasahara,
Development of a Cooperative System with Wire and Arc-based Additive Manufacturing and Machining,
Proc.ICPE2016, Hamamatsu, (2016/11/14-16), USB# B105-8223.

2015?N

Norfariza Wahab, Hiroyuki Sasahara, Shinnosuke Baba, Yuta Hiratsuka, Takashi Nakamura,
Development of High-speed Shearing Method to Obtain the Flow Stress under High Strain Rate,
Proc. 2015 1st Journal Conference on Modeling and Optimization, Phuket, Thailand, (2015.4), pp.109-113.

Hiroyuki Sasahara, Kazuya Mizobe, Susumu Hara, Norio Kushihashi and Shigemi Shindo,
Novel Machining Mthod to Fabricate a Large Size Turbine Disks with Mandrel Type Fixturing Jig and EDM on a Multi-tasking Machine,
Proc. 15th Int. Conf. EUSPEN, Leuven, Belgium (2015.6), pp.377-378.

K. Nomura, N. Takeuchi, A. Kusakabe, M. Chino and H. Sasahara,
Improvement of surface roughness with micro-axial vibration of spindle by pressure pulsation of grinding fluid supplied through inside of wheel,
Proc. 18th International Symposium on Advances in Abrasive Technology,
Jeju Island, Korea (2015.10.5) (Published as Advances Materials Research, 806 (2015) 673-677.?j

Y. Fukuhara, S. Suzuki and H. Sasahara,
Development of in-process monitoring system for grinding wheel surface temperature and grinding state,
Proc.18th International Symposium on Advances in Abrasive Technology,
Jeju Island, Korea (2015.10.6) (Published as Advances Materials Research, 806 (2015) 624-629)

H. Takagi, T. Abe, H.Sannomiya, S. Nishiyama, S. Ohta, K. Nakamura, H. Sasahara,
Strength of laminated object of magnesium alloy fabricated by direct metal lamination using arc discharge,
Proc. 8th Int. Conf. on LEM21 (2015-10) CD-ROM B13.

K. Okamura, H. Sasahara,
Cutting edge temperature prediction on low-frequency vibration drilling considering real cutting time,
Proc. 8th Int. Conf. on LEM21 (2015-10) CD-ROM B30.

M. Goto, W. Takahashi, H. Yamamoto, H. Sasahara,
Effect of cutting fluid on chip adhesion and tool wear in driven rotary cutting,
Proc. 8th Int. Conf. on LEM21 (2015-10) CD-ROM B32.

Norfazillah Talib, M. Goto, H. Sasahara, Erween Abd. Rahim,
The performance of modified Jatropha oil as a sustainable metalworking fluid when high speed rotary machining,
Proc. 8th Int. Conf. on LEM21 (2015-10) CD-ROM B33.

2014?N

Takeyuki Abe and Hiroyuki Sasahara,
Study on dissimilar metal fabrication with direct metal lamination by using arc discharge,
Proc. 14^th Int. Conf. EUSPEN, Dubrovnik, Croatia (2014.6) Vol.1, pp.117-120.

Yohei Yamada and Hiroyuki Sasahara,
Curved-line cutting using flexible circular saw -inclination angle control of machined surface-, Proc. 14^th Int. Conf. EUSPEN, Dubrovnik, Croatia (2014.6) Vol.2, pp.255-258.

Yoshimasa Takada and Hiroyuki Sasahara,
On-demand surface enhancements by friction stir burnishing,
Proc. 14^th Int. Conf. EUSPEN, Dubrovnik, Croatia (2014.6) Vol.2, pp.319-322.

Norfariza Wahab and Hiroyuki Sasahara,
Estimation of workpiece flow stress and friction for fem simulation of high-speed orthogonal cutting process using inverse calculation method,
Proc.ISCIE/ASME 2014 International Symposium on Flexible Automation, Awaji-island(2014.7) CD-ROM #106L. (ISBN 978-4-915740-57-2)

Yuusuke Yamada, Yoshimasa Takada and Hiroyuki Sasahara,
Effect of Rake Angle on the Finish Cutting of the Enhanced Layer Made by Frictional Stir Burnishing,
Proc. 15^th ICPE 2014, Kanazawa (2014.7) pp. 57-60.

Yohei Yamada and Hiroyuki Sasahara,
Development of Multi-Axis Micro Sawing Machine for Free-Form Curves Cutting Using Flexible Circular Saw,
Proc. 15^th ICPE 2014, Kanazawa (2014.7) pp. 114-117.

Norfariza Wahab and Hiroyuki Sasahara,
Estimation of workpiece flow stress and friction for FEM simulation of high-speed orthogonal cutting process,
Proc. 15^th ICPE 2014, Kanazawa (2014.7) pp.184-187.

Masato Goto, Wataru Takahashi, Wataru Sasaki, Takeshi Toujyo, Yuji Takagi,Hiromasa Yamamoto and Hiroyuki Sasahara,
Effect of cutting conditions on tool wear in driven rotary cutting of maraging steel,Proc. IC3MT 2014, Taipei (2014.9) #166_0_0M

Hisataka Takagi, Takeyuki Abe, Hou Sai, Hiroyuki Sasahara,
Mechanical Properties Evaluation of Metal Component Repaired by Direct Metal Lamination, Proc. IC3MT 2014, Taipei (2014.9) # 438_0_3_M.

Nagatoshi Nakatsuka, Yudai Hirai, Atushi Kusakabe, Yasuhiro Yao and Hiroyuki Sasahara,
Effect of coolant supplied through grinding wheel on residual stress of grinding surface,
Proc. 17^th International Symposium on Advances in Abrasive Technology, Hawaii Island, Hawaii (2014.9.23) (Published as Advances Materials Research, 1017 (2014) 33-37.

Kosaku Matsubara, Jun Tsuchimura, Shota Kawazoe and Hiroyuki Sasahara,
Form accuracy of internal grinding of small and deep holes with coolant supplied from inner side of grinding wheel,
Proc. 17^th International Symposium on Advances in Abrasive Technology, Hawaii Island, Hawaii (2014.9.23) (Published as Advances Materials Research, 1017 (2014) 50-54.

Norfariza Wahab and Hiroyuki Sasahara,
Development Of High-speedo Shear-Slitting Method Applicable for Estimation Of Workpiece Flow Stress For FEM Simulation,
ASME 2014 International Mechanical Engineering Congress & Exposition, IMECE2014, November 8-13, 2014, Montreal, Quebec, Canada.?j

Norfariza Wahab and Hiroyuki Sasahara,
Identification Of Friction Characteristics And Flow Stress Of 0.45% Carbon Steel During Cutting Process,
2014 International Conference on Applied Mechanics (ICOAM 2014),?@ Xiamen, China, (2014.11), USB ICOA2014-2-01015.

2013?N

Hiroyuki Sasahara, Kosuke Nagao, Kenichi Kumakura,
Micromachining of Glass with Ultrasonic-vibration Table,
Proc. 13^th Int. Conf. EUSPEN, Berlin (2013.5) Vol.2, pp.76-79.

Erween Abd Rahim, Zazuli Mohid, Ahmad Fahmi Yusuf, Mohd Romadan Hamzah, Hiroyuki Sasahara, Rei Koyasu,
Investigation of End Mill Geometry when Helical Millin